Co-immobilizing laccase-mediator system by in-situ synthesis of MOF in PVA hydrogels for enhanced laccase stability and dye decolorization efficiency.

The laccase mediator system (LMS) with a broad substrate range has attracted much attention as an efficient approach for water remediation. However, the practical application of LMS is limited due to their high solubility, poor stability and low reusability. Herein, the bimetallic Cu/ZIFs encapsulated laccase was in-situ grown in poly(vinyl alcohol) (PVA) polymer matrix. The PVA-Lac@Cu/ZIFs hydrogel was formed via one freeze-thawing cycle, and its catalytic stability was significantly improved. The mediator was further co-immobilized on the hydrogel, and this hierarchically co-immobilized ABTS/PVA-Lac@Cu/ZIFs hydrogel could avoid the continuous oxidation reaction between laccase and redox mediators. The co-immobilized LMS biocatalyst was used to degrade malachite green (MG), and the degradation rate was up to 100 % within 4 h. More importantly, the LMS could be recycled synchronously from the dye solutions and reused to degrade MG multiple times. The degradation rate remained above 69.4 % after five cycles. Furthermore, the intermediate products were detected via liquid chromatography-mass spectrometry, and the potential degradation pathways were proposed. This study demonstrated the significant potential of utilizing the MOF nanocrystals and hydrogel as a carrier for co-immobilized LMS, and the effective reuse of both laccase and mediator was promising for laccase application in wastewater treatment.

Solvent-free synthesis of hydrophobic and amphiphilic esters using a chemically modified lipase from Thermomyces lanuginosus: a comparative study with native and immobilized forms.

Using lipases to catalyze the synthesis of the most differentiated type of compounds remains one of the major challenges among scientists. Seeking more economic and advantageous catalysts is a current goal of green chemistry. In this work, we demonstrate the potential of a chemically modified form of lipase from Thermomyces lanuginosus (cmLTL) for the synthesis of both hydrophobic (heptyl heptanoate, heptyl octanoate, heptyl decanoate, decyl heptanoate, decyl octanoate and decyl decanoate) and amphiphilic (2-(2-ethoxyethoxy)ethyl oleate and 2-(2-ethoxyethoxy)ethyl linoleate) esters, in bulk. The results were compared with its native (LTL) and immobilized (imLTL) forms. The data revealed that LTL showed poor activity for all reactions performed with n-heptane (η<20 %). ImLTL was able to synthesize all hydrophobic esters (η>60 %), with exception of the short ester, heptyl heptanoate. cmLTL was the only form of LTL capable of producing hydrophobic and amphiphilic esters, without compromising the yield when the reactions were performed under solvent-free conditions (>50 %). Molecular modeling showed that the active pocket of cmLTL is able to deeply internalize transcutol, with stronger interactions, justifying the outstanding results obtained. Furthermore, owing to the possibility of cmLTL filtration, the reusability of the catalyst is ensured for at least 6 cycles, without compromising the reaction yields.

Changing human hair fibre colour and shape from the follicle.

INTRODUCTION: Natural hair curvature and colour are genetically determined human traits, that we intentionally change by applying thermal and chemical treatments to the fibre. Presently, those cosmetic methodologies act externally and their recurrent use is quite detrimental to hair fibre quality and even to our health. OBJECTIVES: This work represents a disruptive concept to modify natural hair colour and curvature. We aim to model the fibre phenotype as it is actively produced in the follicle through the topical delivery of specific bioactive molecules to the scalp. METHODS: Transcriptome differences between curly and straight hairs were identified by microarray. In scalp samples, the most variable transcripts were mapped by in situ hybridization. Then, by using appropriate cellular models, we screened a chemical library of 1200 generic drugs, searching for molecules that could lead to changes in either fibre colour or curvature. A pilot-scale, single-centre, investigator-initiated, prospective, blind, bilateral (split-scalp) placebo-controlled clinical study with the intervention of cosmetics was conducted to obtain a proof of concept (RNEC n.92938). RESULTS: We found 85 genes transcribed significantly different between curly and straight hair, not previously associated with this human trait. Next, we mapped some of the most variable genes to the inner root sheath of follicles, reinforcing the role of this cell layer in fibre shape moulding. From the drug library screening, we selected 3 and 4 hits as modulators of melanin synthesis and gene transcription, respectively, to be further tested in 33 volunteers. The intentional specific hair change occurred: 8 of 14 volunteers exhibited colour changes, and 16 of 19 volunteers presented curvature modifications, by the end of the study. CONCLUSION: The promising results obtained are the first step towards future cosmetics, complementary or alternative to current methodologies, taking hair styling to a new level: changing hair from the inside out.

Laccase-Catalyzed Synthesis of Added-Value Polymers from Cork and Grape Extracts.

The development of products from natural plant sources, including agriculture and food wastes, contributes significantly to the circular economy and global sustainability. Cork and grape wastes were employed as the primary sources in this study to obtain compounds of interest under mild extraction conditions. Laccase was applied to oxidize the cork and grape extracts, with the aim of producing value-added molecules with improved properties. Ultraviolet-visible (UV-vis) spectroscopy was assessed to monitor the oxidation process, and characterization of the end products was performed by matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) spectroscopy. The antioxidant and antiaging properties were evaluated by means of ABTS, DPPH, FRAP, and SPF testing. Overall, as compared to their monomeric counterparts, the polymeric compounds displayed remarkable antioxidant and antiaging characteristics after laccase oxidation, showing tremendous potential for applications in the food, pharmaceutical, cosmetic, and textile industries.

In-situ encapsulation and construction of Lac@HOFs/hydrogel composite for enhancing laccase stability and azo dyes decolorization efficiency.

Enzymes with high catalytic activity and stability have been used for the sustainable development of green chemical applications, such as water remediation. Immobilized laccase can be used to construct a synergistic system for adsorption and degradation, which has great potential for water remediation. Herein, a hydrogen-bonded organic framework was installed onto laccase in-situ to form a net-carboxylate-arranged defective cage, which enhanced its catalytic stability. Thereafter, the CMC/PVA/Lac@HOF-101 hydrogel was fabricated by freeze-thaw cycles using sodium carboxymethylcellulose and polyvinyl alcohol as carriers and copper (II) as a cross-linker. Notably, the MOFs/hydrogel as a protective carrier of laccase maintain long-term recyclability and catalytic stability. After the fifth catalytic cycle, approximately 66.7 % activity of the CP-Lac@HOF-101 was retained. When both free laccase and CP-Lac@HOF-101 were used for decolorization of Acid Orange 7 (AO), the removal rates were 10.9 % and 82.5 % after 5 h, respectively. Furthermore, even in the presence of metal cations, almost 60.0 % of the AO removal efficiency was achieved. The relationship between the structure of the azo dyes and decolorization efficiency of the synergistic system was further investigated. This study offers a method for constructing enzyme@HOF-based composite hydrogels and provides a promising water remediation strategy.

Deep Eutectic Solvents as Suitable Solvents for Lipase-Catalyzed Transesterification Reactions.

In this work, three deep eutectic mixtures (DES 1: choline chloride/urea; DES 2: choline chloride/glycerol; and DES 3: tetrabutylammonium bromide/imidazole) were investigated as mediums for the synthesis of glucose laurate and glucose acetate. Aiming to achieve a greener and more sustainable approach, the synthesis reactions were catalyzed by lipases from Aspergillus oryzae (LAO), Candida rugosa (LCR), and porcine pancreas (LPP). The hydrolytic activity of lipases against p-nitrophenyl hexanoate revealed no evidence of enzyme inactivation when DES were used as medium. Regarding the transesterification reactions, combining LAO or LCR with DES 3 resulted in the efficient production of glucose laurate (from glucose and vinyl laurate) (conversion >60 %). The best result for LPP was observed in DES 2, with 98 % of product production after 24 hours of reaction. When replacing vinyl laurate by a smaller hydrophilic substrate, vinyl acetate, a distinct behavior was observed. LCR and LPP performed better in DES 1, yielding more than 80 % of glucose acetate after 48 hours of reaction. The catalytic activity of LAO was less pronounced, reaching only nearly 40 % of product in DES 3. The results highlight the potential of combining biocatalysis with greener and environmentally-safer solvents, for the synthesis of differentiated chain-length sugar fatty acid esters (SFAE).

Non-Canonical Amino Acids as Building Blocks for Peptidomimetics: Structure, Function, and Applications.

This review provides a fresh overview of non-canonical amino acids and their applications in the design of peptidomimetics. Non-canonical amino acids appear widely distributed in nature and are known to enhance the stability of specific secondary structures and/or biological function. Contrary to the ubiquitous DNA-encoded amino acids, the structure and function of these residues are not fully understood. Here, results from experimental and molecular modelling approaches are gathered to classify several classes of non-canonical amino acids according to their ability to induce specific secondary structures yielding different biological functions and improved stability. Regarding side-chain modifications, symmetrical and asymmetrical α,α-dialkyl glycines, Cα to Cα cyclized amino acids, proline analogues, ß-substituted amino acids, and α,ß-dehydro amino acids are some of the non-canonical representatives addressed. Backbone modifications were also examined, especially those that result in retro-inverso peptidomimetics and depsipeptides. All this knowledge has an important application in the field of peptidomimetics, which is in continuous progress and promises to deliver new biologically active molecules and new materials in the near future.

Designing and characterization of curcumin-loaded nanotechnological dressings: A promising platform for skin burn treatment.

Burns affect the skin and appendages, impair their function, and become favorable regions for bacterial infections. Owing to time-consuming and costly treatments, burns have been considered a public health problem. The limitations of the treatments used for burns have motivated the search for more efficient alternatives. Curcumin has several potential properties such as anti-inflammatory, healing, and antimicrobial activities. However, this compound is unstable and has low bioavailability. Therefore, nanotechnology could offer a solution for its application. This study aimed to develop and characterize dressings (or gauzes) impregnated with curcumin nanoemulsions that were prepared using two different techniques as a promising platform for skin burn treatment. In addition, the effect of cationization on curcumin release from the gauze was evaluated. Nanoemulsions were successfully prepared using two methods, ultrasound and a high-pressure homogenizer, with sizes of 135 nm and 144.55 nm, respectively. These nanoemulsions exhibited a low polydispersity index, adequate zeta potential, high encapsulation efficiency, and stability for up to 120 d. In vitro assays demonstrated a controlled release of curcumin between 2 and 240 h. No cytotoxicity was observed at concentrations of curcumin up to 75 µg/mL, and cell proliferation was observed. The incorporation of nanoemulsions in the gauze was successfully achieved, and the evaluation of curcumin release showed a faster release from cationized gauzes, whereas the non-cationized gauze promoted a more constant release.

Lipase-Catalysed Polymerization of Eutectic Mixtures.

Aiming to reduce the toxicity and operational costs often associated to chemical processes, the enzymatic synthesis is applied herein as a sustainable route for producing polyesters. The use of NADES' (Natural Deep Eutectic Solvents) components as a source of monomers for the synthesis of polymers through lipase-catalyzed esterification in an anhydrous medium is detailed for the first time. Three NADES composed by glycerol and an organic base, or acid, were used to produce polyesters, through polymerization reactions catalyzed by Aspergillus oryzae lipase. High polyester conversion rates (above 70 %), containing at least 20 monomeric units (glycerol:organic acid/base (1 : 1)), were observed by matrix-assisted laser desorption/ionization-time-of-flight (MALDI-TOF) analysis. The NADES monomers' capacity for polymerization, along with their non-toxicity, cheap cost, and simplicity of production, sets up these solvents as a greener and cleaner approach for the synthesis of high value-added products.

A Comprehensive Review of Mammalian Pigmentation: Paving the Way for Innovative Hair Colour-Changing Cosmetics.

The natural colour of hair shafts is formed at the bulb of hair follicles, and it is coupled to the hair growth cycle. Three critical processes must happen for efficient pigmentation: (1) melanosome biogenesis in neural crest-derived melanocytes, (2) the biochemical synthesis of melanins (melanogenesis) inside melanosomes, and (3) the transfer of melanin granules to surrounding pre-cortical keratinocytes for their incorporation into nascent hair fibres. All these steps are under complex genetic control. The array of natural hair colour shades are ascribed to polymorphisms in several pigmentary genes. A myriad of factors acting via autocrine, paracrine, and endocrine mechanisms also contributes for hair colour diversity. Given the enormous social and cosmetic importance attributed to hair colour, hair dyeing is today a common practice. Nonetheless, the adverse effects of the long-term usage of such cosmetic procedures demand the development of new methods for colour change. In this context, case reports of hair lightening, darkening and repigmentation as a side-effect of the therapeutic usage of many drugs substantiate the possibility to tune hair colour by interfering with the biology of follicular pigmentary units. By scrutinizing mammalian pigmentation, this review pinpoints key targetable processes for the development of innovative cosmetics that can safely change the hair colour from the inside out.

Addressing the Structural Organization of Silicone Alternatives in Formulations by Molecular Dynamics Simulations and a Novel Equilibration Protocol.

The world of cosmetics is an always-evolving field with constant updates on its formulation components. The current reality asks for an ever-increasing need for natural and sustainable replacements for synthetic compounds in all fields of modern consumer products. However, the research and development stages of finding these alternatives can be an expensive, time-consuming, and often wasteful process that turns this task into a laborious procedure. This study introduces the development of a computational methodology that will aid the research of silicone alternatives, disclosing their structural performance in a formulation. Additionally, an equilibration protocol was developed to measure the distribution and densities of these silicone alternatives to determine how they behave in relation to their counterparts, using molecular dynamics simulations. Two systems were tested, A and B, where the former is composed of one ester (Dipentaerythrityl Hexa C5 Acid Ester) and the latter by an ester combined with an alkane (Triheptanoin and C13-Isoalkane); all three molecules are commercially available and widely used. Both systems were subjected to a 3-step thermal regulation strategy. The systems went through an initial simulation at 25 °C and at 70 °C, then a temperature switch took place (25 °C « 70 °C), then a shock to 200 °C, and finally a Simulated Annealing protocol reaching 250 °C. In the end, all systems converged towards micelle-like structures. These results come to further ascertain the position of computational chemistry and Molecular Dynamics Simulations as an important part of R&D processes in modern sciences and investigation.

Encapsulated laccase in bimetallic Cu/Zn ZIFs as stable and reusable biocatalyst for decolorization of dye wastewater.

Laccase have received extensive attention in pollutant degradation, but its practical viability is largely affected by the poor stability, easy inactivation and difficulty in recycling for the present. Enzyme immobilization offers enhanced enzyme stability and constructs a synergistic system for the efficient adsorption and degradation of pollutants. In this study, bimetallic Cu/Zn ZIFs were synthesized by co-precipitation method as the protective carrier for laccase. Lac@Cu-ZIF-90 exhibited a good protective effect on laccase and showed a high operational stability in various interfering environments. Free laccase was completely inactivated at pH 7.0 but Lac@Cu-ZIF-90 could maintain 50.0 % activity. Benefiting from the encapsulation of laccase and porous structure of Cu-ZIF-90, the Lac@Cu-ZIF-90 exhibited decolorization efficiency for dye wastewater. More importantly, the Lac@Cu-ZIF-90 could be recovered from the dye solution and re-used to adsorb and degrade the synthetic dye for multiple times, its removal rate for reactive deep green was only decreased about 10.8 % after five cycles. This work reveals that the Cu-ZIF-90 provides a favorable environment for laccase and as a protective layer to relieve the conformation change, which provides an efficient strategy to decolorize dye wastewater. Therefore, Cu-ZIF-90 promises applications as enzymes encapsulation has great potential in water remediation.

Acetylation and phosphorylation processes modulate Tau's binding to microtubules: A molecular dynamics study.

The microtubule-associated protein Tau has its normal function impaired when undergoing post-translational modifications. In this work, molecular modelling techniques were used to infer the effects of acetylation and phosphorylation in Tau's overall conformation, electrostatics, and interactions, but mostly in Tau's ability to bind microtubules. Reported harmful Lys sites were mutated by its acetylated form, generating eight different acetylated Tau (aTau) analogues. Similarly, phosphorylation sites found in normal brains and in Alzheimer's lesioned brains were considered to design phosphorylated Tau (pTau) analogues. All these designed variants were evaluated in intracellular fluid and near a microtubule (MT) model. Our in silico findings demonstrated that the electrostatic changes, due to the absence of positive Lys' charges in acetylation cases, or the increasingly negative charge in the phosphorylated forms, hamper the association to the MT tubulins in most cases. Post-translational modifications also pose very distinct conformations to the ones described for native Tau, which hinders the microtubule-binding region (MTBR) and turns difficult the expected binding. Our study elucidates important molecular processes behind Tau abnormal function which can inspire novel therapeutics to address Alzheimer's disease.

Chemical modification of lipases: A powerful tool for activity improvement.

The demand for adequate and ecologically acceptable procedures to produce the most differentiated products has been growing in recent decades, with enzymes being excellent examples of the advances achieved so far. Lipases are astonishing catalysts with a vast range of applications including the synthesis of esters, flavors, biodiesel, and polymers. The broad specificity of the substrates, as well as the regio-, stereo-, and enantioselectivity, are the differentiating factors of these enzymes. Structural modification is a current approach to enhance the activity of lipases. Chemical modification of lipases to improve catalytic performance is of great interest considering the increasingly broad fields of application. Together with the physical immobilization onto solid supports, different strategies have been developed to produce catalysts with higher activity and stability. In this review, practical insights into the different strategies developed in recent years regarding the modification of lipases are described. For the first time, the impact of the modifications on the activity and stability of lipases, as well as on the biotechnological applications, is fully compiled.

Folate-Targeted Liposomal Formulations Improve Effects of Methotrexate in Murine Collagen-Induced Arthritis.

Methotrexate (MTX) is first-line therapy for the treatment of rheumatoid arthritis (RA), however, its use may be limited by side effects notably post-injection malaise. When patients are intolerant or become unresponsive, second-line or antibody therapy may be indicated. A folate-targeted liposomal formulation of MTX (FL-MTX) is tropic to arthritic paws and prevents the onset of collagen-induced arthritis (CIA) in the mouse. We optimized the drug-to-lipid molar ratio to 0.15 and demonstrated the therapeutic efficacy of this form at 2 mg/kg MTX intraperitoneal (i.p.) twice a week. These improved liposomes were present in inflamed joints in proportion to the degree of swelling of the paw and bone remodeling activity. FL-MTX had lower hepatic and renal elimination of MTX than the free substance. FL-MTX provided equivalent results when given i.p. or subcutaneous (s.c.) and FL-MTX 2 mg/kg (drug/lipid 0.15), twice weekly, was similar to or more effective than 35 mg/kg MTX (same route and schedule) in reducing the incidence and swelling in the murine CIA model. These results suggest that FL-MTX is a more potent nanotherapeutic formulation than free MTX treatment. Its potential benefits for patients may include reduced frequency of treatment and lower overall doses for a given response.

Biotechnology of functional proteins and peptides for hair cosmetic formulations.

Cosmetics procedures and products combined with environmental insults and daily routines induce irreversible changes in hair. As result of damage, the hair loses some of its properties like strength, elasticity, and smoothness. Recent studies revealed the positive effects of protein-based cosmetics in providing protection to hair. Additionally, these cosmetic products have also shown a great ability to modify hair fibers. We review the effect of protein-based cosmetic formulations on hair properties like color, scent, strength, shape, and volume, highlighting the potential of keratin-based particles and keratin-fusion proteins. In the future, incorporating multifunctional proteins and peptides in the development of alternative hair formulations will result in advanced, sustainable, ecofriendly cosmetic products with a great impact on the cosmetic industry.

Mapping hair follicle-targeted delivery by particle systems: What has science accomplished so far?

The importance of the hair follicle in the process of cutaneous drug penetration has been established since this skin appendage was recognized as an entry point for topically applied substances. A comprehensive review on the hair follicle as a target per se is here provided, exploring the current knowledge on both targeted regions and delivery systems that take advantage of this permeation route. The follicular penetration is a complex process, whose effectiveness and efficiency strongly depends on a diversity of different factors including follicular density and size, activity status of hair follicles and physicochemical properties of the topically applied substances. Nanocarriers represent a heterogeneous assembly of molecules organized into particles and they have revolutionized drug delivery in several areas of medicine, pharmacology and cosmetics. As they possess an inherent ability to use the follicular route, they are reviewed here having in perspective the hair follicle zones that they are able to reach as reported. In this way, a follicular road map for the different delivery systems was compiled to assist as a guiding tool for those that have interest in the development and/or application of such delivery systems for hair and skin treatment or care.

Changing the shape of wool yarns via laccase-mediated grafting of tyrosine.

The shape of wool yarns was changed by laccase-assisted grafting of tyrosine. Prior to tyrosine grafting a cysteine pre-treatment was optimized aiming to increase the amount of thiol reaction groups available. The best operational conditions for laccase-assisted tyrosine grafting were: i) pre-treatment with cysteine (2.2 mM) in a solution of 20 % ethanol, 15 % propylene glycol and 0.5 % benzyl alcohol, pH = 10, 40 °C; ii) tyrosine grafting with 3.0 mM tyrosine, 18 U/mL laccase, pH = 5, 40 °C. The shape modification was evaluated by number of curly twists determination on the grafted yarn samples. The thermal and mechanical properties of the grafted wool yarns was evaluated by TGA, DSC and breaking strength determination. The amount of free thiols and weight gain were assessed aiming to infer the role of the cysteine pre-treatment on the final tyrosine grafting and shape modification. The laccase-assisted grafting of tyrosine onto wool yarns have influenced the thermal and mechanical properties of the yarns however without compromising their structural integrity for the final application purposes. The developed methodology to impart new shape to wool yarns is presented herein as an environmentally friendly alternative to chemical methods. The new findings revealed great potentialities for application in similar fibers like hair.

Effect of ultrasound on protein functionality.

The review focus on the effect of ultrasound on protein functionality. The presence of transient ultrasonic mechanical waves induce various sonochemical and sonomechanical effects on a protein. Sonochemical effects include the breakage of chains and/or the modification of side groups of aminoacids. Sonomechanical modifications by enhanced molecular agitation, might lead to the transient or permanent modification of the 3D structure of the folded protein. Since the biological function of proteins depends on the maintenance of its 3D folded structure, both sonochemical and sonomechanical effects might affect its properties. A protein might maintain its 3D structure and functionality after minor sonochemical effects, however, the enhanced mass transfer by sonomechanical effects might expose internal hydrophobic residues of the protein, making protein unfolding to an irreversible denatured state. Ultrasound enhanced mass transport effects are unique pathways to change the 3D folded structure of proteins which lead to a new functionality of proteins as support shield materials during the formation microspheres. Enzymes are proteins and their reactions should be conducted in a reactor set-up where enzymes are protected from sonic waves to maximize their catalytic efficiency. In this review, focused examples on protein dispersions/emulsions and enzyme catalysis are given.

Comparing the delivery to the hair bulb of two fluorescent molecules of distinct hydrophilicities by different nanoparticles and a serum formulation.

The follicular route is an important drug penetration pathway in any topical application, either concerning dermatological and cosmetic skin treatments or any transdermal administration regimen. Efficient transport into follicles will depend on drug inherent properties but also on the chosen vehicle. The main study goal was to compare several systems for the delivery to the hair bulb of two fluorescent molecules of different water affinities: the hydrophobic Nile Red and the quite similar but hydrophilic Nile Blue. Three common nanoparticle types were compared in terms of encapsulation efficiency and stability: liposomes, ethosomes and polymeric nanoparticles. A liquid serum-like formulation was also developed, adjusting the final ethanol amount to the type of dye to be solubilized. Then, this formulation and the nanoparticle systems that successfully passed characterization and stability stages were further studied on their ability to reach the bulb. The serum formulation was able to deliver, both drug models, to deeper follicular regions than nanoparticles. Attending to the envisioned zone target of the follicle, the simplest approach proved to be the best choice from all the systems tested in this work. Nonetheless, nanocarriers and the inherent complexity of their manufacturing processes may be justified under very specific requirements.